How should I clean the outer membrane of an air-membrane building when it is dirty?
Release time:
2023-07-20
An inflatable membrane building is a new type of building that has many excellent characteristics of its inflatable membrane membrane material. The common inflatable membrane building generally adopts fabric membrane material, which has good deformation ability and high strength, and also has strong durability and self-cleaning. Therefore, after the air membrane building is completed and used, the later maintenance work is very simple.
Air film building in daily use generally do not need additional cleaning, because it is usually the top of the arc, coupled with the membrane through the air membrane manufacturers special treatment comes with the self-cleaning properties, usually when it rains, the rain will be gathered at the top of the air film into a droplet drop, so that the membrane surface layer to get natural cleaning. However, if there is a real need for cleaning, it must be cleaned according to the guidance of the air film manufacturer, using the special cleaning method for air film.
How should we clean the outer membrane of an air membrane building when it is dirty? Professional air membrane manufacturer Beijing Xinyuan Yijia Membrane Structure Technology Co., Ltd. leads you to see the precautions.
The exterior of air film membrane is coated with a special coating. Strong alkaline or acidic detergents will damage the coating, thus affecting the performance of the membrane. Therefore, when choosing detergents, you should use mild, non-bonding special detergents for air membrane as much as possible.
If you choose the traditional manual cleaning method, you need to pay attention to the choice of cleaning tools. Cleaning should choose a soft brush, wipe the need to use anti-static dry rags, rags can not be too hard, to avoid damage to the surface layer of the membrane material, and reduce the transparency and strength.
Steam cleaning is also one of the common cleaning methods for air membrane. It is the principle of high temperature and high pressure under the action of saturated steam, the surface layer of the air film stains dissolved, and will be vaporised and evaporated. It should be noted that the steam cleaning needs to be operated by the air film manufacturer professionals, the steam temperature can not exceed 150 degrees Celsius, so as to avoid injuries and damage to the membrane material.
Keywords:
air membrane,inflat structure,air dome
Latest News
PRODUCTS
CONTACT US
TEl :
WHATSAPP:
+8613717559290
E-MAIL :
ADDRESS :
No. 137, 1st Floor, Block B, No. 23 Chaoqian Road, Science and Technology Park, Changping District, Beijing
Online Message