How to clean the air membrane if it is dirty?
Release time:
2023-10-24
The membrane material of the air membrane building has self-cleaning property, and it is not easy to get dirty under normal circumstances. However, with the growth of the use of time, affected by the local environment and climate, the film surface of the air membrane will inevitably be dirty, which requires manual cleaning.
For most membrane materials, cleaning not only can not extend the service life of the air membrane, improper cleaning will shorten its life, therefore, special attention should be paid to cleaning the membrane surface.
How should the air membrane be cleaned?
Before cleaning the air membrane, the staff should check the safety equipment. Beijing Xinyuan Yijia Membrane Structure Technology Co., Ltd. will design personnel on the membrane surface of the channel and easy to secure the safety rope connection. Cleaning tasks involve high-altitude work, so it is necessary to check whether the safety rope is in good condition and can be fixed on the safety rope connector reserved for the air membrane.
The membrane surface is vulnerable to damage by sharp objects, and it will be slippery in the wet state, so the cleaning personnel must wear non-slip soft-soled shoes when walking on the roof. One is to protect the air membrane from accidental damage, and the other is to protect themselves from slipping and injuring themselves when walking on the membrane surface.
Usually, the surface of the membrane will be coated with PVDF or PVF coating to enhance the self-cleaning and service life of the air membrane, in order to ensure that the surface coating of the membrane is not destroyed, in the cleaning process can not use cleaning agent, strong solvent, hard brush and high pressure water gun.
Special cleaning agent should be selected for cleaning the membrane surface. Compared with household soap or tableware cleaners, general membrane cleaning agents are usually relatively safe, but long-term contact with the skin, eyes and mucous membranes must be avoided, and the safe use instructions provided by the cleaning agent supplier must be strictly followed.
The above is the membrane cleaning precautions summarized by Beijing Xinyuan Yijia Membrane Structure Technology Co., LTD.
Keywords:
air membrane,inflat structure
Latest News
PRODUCTS
CONTACT US
TEl :
WHATSAPP:
+8613717559290
E-MAIL :
ADDRESS :
No. 137, 1st Floor, Block B, No. 23 Chaoqian Road, Science and Technology Park, Changping District, Beijing
Online Message